PDA

View Full Version : new bulid



Ashoof
11-06-2007, 15:52
doing some testing to see if i can stull all the goodees in small box so far so good i need to figer how to re wire the thingy
Note the Black GTX RAd is very very good spec
D5 Rad
balck GTX 240
intell Extream 2.9GHZ (Naaah OC 3.7 GHz )much better :)
8800 ultra Sli OC 675 /1100
4gb ram
4 x 150 Raptor x Raid 0 strip block size 256K
adaptecRaid 31205 Card the reson i am having issue with inbord raid controler now way much better when OC
D5 pumb
the rest is history heheh

D35ertFox
11-06-2007, 17:35
doing some testing to see if i can stull all the goodees in small box so far so good i need to figer how to re wire the thingy
Note the Black GTX RAd is very very good spec
D5 Rad
balck GTX 240
intell Extream 2.9GHZ (Naaah OC 3.7 GHz )much better :)
8800 ultra Sli OC 675 /1100
4gb ram
4 x 150 Raptor x Raid 0 strip block size 256K
adaptecRaid 31205 Card the reson i am having issue with inbord raid controler now way much better when OC
D5 pumb
the rest is history heheh

lol you nutter, what motherboard you got there for that space machine :D

Ashoof
11-06-2007, 17:38
lol you nutter, what motherboard you got there for that space machine :D

It is EVGA 680i A1

GUEST
11-06-2007, 19:45
What are these pictures of? I recognise the power lead... I got one for my Kettle. ;)
Is it a new kettle? If so... send me your old one

Rozonus
14-06-2007, 14:47
E gads! You've gone too far this time, Ashoof!

Ashoof
14-06-2007, 14:58
E gads! You've gone too far this time, Ashoof!

it is only a case i like the idea it is small i did not really like the see throw to much thow but any way i can always throw the stuff in any pc case

GUEST
15-06-2007, 11:42
it is only a case i like the idea it is small i did not really like the see throw to much thow but any way i can always throw the stuff in any pc case

U can throw the bits in any PC case? Any?

Throw em in mine ! lol ;)

XXXL_4_Real
15-06-2007, 14:19
THE 680i chipsets are known for the driver issue look at xtremesystems.org for the evga settings.

The a2 version has sorted things out.

What are your memory timings because you use 4 gig

just curious

nice setup indeed

Ashoof
15-06-2007, 14:54
THE 680i chipsets are known for the driver issue look at xtremesystems.org for the evga settings.

The a2 version has sorted things out.

What are your memory timings because you use 4 gig

just curious

nice setup indeed

will for the raid i am happy with adaptec raid card
momry i am running 4-4-4-12 950 hz cant push more cuz of 4 sticks i can push wy more than that with 2 memory stiks but again my multiplayer is 13 atm
volt is set to 2.4V kids Dont try this at home you will fry your memory

MurderdollX
22-06-2007, 13:33
Urm what was up with your old case o.0

XXXL_4_Real
22-06-2007, 17:01
Better Watch Out With The Voltage M8

The Mobo's Are Known For Overvolting I Used To Run @2.4 Now I Use 1.9

Biggizmo Has The Same Mobo As U Have And Has The Same Ram As I Have. He Fwasted The Corsair On 2.2 Even With The Dominator Fan On It And Couldnt Get It Stable Above 950 While I Was Doing More

Ashoof
22-06-2007, 18:59
Better Watch Out With The Voltage M8

The Mobo's Are Known For Overvolting I Used To Run @2.4 Now I Use 1.9

Biggizmo Has The Same Mobo As U Have And Has The Same Ram As I Have. He Fwasted The Corsair On 2.2 Even With The Dominator Fan On It And Couldnt Get It Stable Above 950 While I Was Doing More

will for the memory i use 1.9V is not good at all if i drop below 2.2 V i start to have problems memory get hot but i i have cooler on top

GUEST
23-06-2007, 00:19
His old PC had an Atari ST enclosure. This one got somethin goin on. Looks like its got an ice makin machine built in with all those pipes, either that or he keepin the house warm. ;)